Set of 8 pieces valve tappet. Smaller head diameter - 20.3mm - for GT camshaft
Parts
100E engine inlet and exhaust vave guide. 55mm long x 12.7mm o/d x 8mm i/d.
camshaft lock washer, dimensions 58mm x 38mm with 35mm hole centres.
three part camshaft bearing set. standard bore inner, standard size outer. this part is used through later model engines also.
three part camshaft bearing set. standard bore inner, standard size outer. this part is used through later model engines also.
standard outer - under size inner 0.002" or 0.010" limited...
standard outer - under size inner 0.002" or 0.010" limited...
single width timing chain with link -application also Escort 1100 or 1300, Cortina Mk1 1300 or 1600, Capri 1300 or 1600, Consul Classic Capri, Corsair 1500, Cortina Mk2 1300, 1500 or 1600ohv,...
Set of 8 pieces valve tappet. Standard head diameter - 21.5mm.
For smaller headed version (20.3mm) for GT camshafts - see 105E-6500-B
For smaller headed version (20.3mm) for GT camshafts - see 105E-6500-B
105E type exhaust valve. 97.50mm long, head diameter 30.15mm, offered with standard stem (nominal 5/16"), and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter...
105E type exhaust valve. 97.50mm long, head diameter 30.15mm, offered with standard stem (nominal 5/16"), and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter...
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter
measures...
measures...
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter
measures...
measures...
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter
measures...
measures...
Pre-crossflow and crossflow cam shaft with wider lobe machined from billet steel. Later camshaft with the offset locating dowel, supplied with 105E-6256-B later sprocket - with two bolts part...
Camshaft to camshaft sprocket dowel, dimensions 15mm overall length (4mm long major diameter, 11mm minor diameter), 6.4mm minor diameter and 8mm diameter shoulder.
Fits 109E-6250 camshaft for pre...
Fits 109E-6250 camshaft for pre...
Valve spring set, 8 pieces. approx dimensions 37.5mm long, 28mm diameter, 3.7mm wire diameter, Fits:- Consul Corsair Consul Classis Consul Capri
Extra strong double valve spring set (16 pieces) - inner and outer spring, outer spring 38mm tall, 28.5mm diameter, 4mm wire. inner spring 38mm tall, 20mm diameter, 2.3mm wire.
Fits:-
Anglia...
Fits:-
Anglia...
0.003" oversize stem exhaust valve Fits:- Consul Mk1 (1951 to 1956) Consul 375 Mk2 (1956 to 1962) Zodiac Mk1 (1951 to 1956) Zodiac Mk2 (1956 to 1962) Zephyr Six Mk1 (1951 to 1956) Zephyr Mk2 (1956...
0.015" oversize stem exhaust valve
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac Mk2 (1956 to 1962)
Zephyr Six Mk1 (1951 to 1956)
Zephyr...
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac Mk2 (1956 to 1962)
Zephyr Six Mk1 (1951 to 1956)
Zephyr...
0.030" oversize stem exhaust valve
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac Mk2 (1956 to 1962)
Zephyr Six Mk1 (1951 to 1956)
Zephyr...
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac Mk2 (1956 to 1962)
Zephyr Six Mk1 (1951 to 1956)
Zephyr...
0.003" oversize stem inlet valve
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac Mk2 (1956 to 1962)
Zephyr Six Mk1 (1951 to 1956)
Zephyr Mk2...
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac Mk2 (1956 to 1962)
Zephyr Six Mk1 (1951 to 1956)
Zephyr Mk2...
0.015" oversize stem inlet valve
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac Mk2 (1956 to 1962)
Zephyr Six Mk1 (1951 to 1956)
Zephyr Mk2...
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac Mk2 (1956 to 1962)
Zephyr Six Mk1 (1951 to 1956)
Zephyr Mk2...
0.030" oversize stem inlet valve
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac Mk2 (1956 to 1962)
Zephyr Six Mk1 (1951 to 1956)
Zephyr Mk2...
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac Mk2 (1956 to 1962)
Zephyr Six Mk1 (1951 to 1956)
Zephyr Mk2...
Valve tappet cam follower (remanufactured part) approx dimensions, overall height 60mm, tappet lobe 22.3mm diameter, 5.6mm thick, stem 12.6mm diameter.
Fits:-
Consul Mk1 (1951 to 1956)
Consul...
Fits:-
Consul Mk1 (1951 to 1956)
Consul...
Standard exhaust valve, dimensions 115mm long, 34mm diameter head with 7.8mm diameter stem.
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
0.003" oversize stem exhaust valve
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
0.015" oversize stem exhaust valve
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
0.030" oversize stem exhaust valve
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
Standard inlet valve, dimensions 115mm long, 39.5mm diameter head with 7.8mm diameter stem.
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
0.003" oversize stem inlet valve Fits:- Zephyr 4 & 6 Mk3 (1962 to 1966) Zodiac Mk3 (1962 to 1966)
0.015" oversize stem inlet valve
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
0.030" oversize stem inlet valve
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
Fits:-
Zephyr 4 & 6 Mk3 (1962 to 1966)
Zodiac Mk3 (1962 to 1966)
Valve spring set, 8 pieces. approx dimensions 45mm long, 35mm diameter, 4.7mm wire diameter,
Fits:-
Zephyr 4 Mk3
Fits:-
Zephyr 4 Mk3
Valve spring set, 12 pieces. approx dimensions 45mm long, 35mm diameter, 4.7mm wire diameter,
Fits:-
Zephyr 6 Mk3
Zodiac Mk3
Fits:-
Zephyr 6 Mk3
Zodiac Mk3
Valve spring set, 8 pieces. approx dimensions 49mm long, 35mm diameter, 4.4mm wire diameter, Fits:- Zephyr V4 Mk4- Jan 1966 to July 1966
Valve spring set, 12 pieces. approx dimensions 49mm long, 35mm diameter, 4.4mm wire diameter,
Fits:-
Zephyr V6 Mk4 - Jan 1966 to July 1966
Zodiac Mk4 - Jan 1966 to July 1966
Fits:-
Zephyr V6 Mk4 - Jan 1966 to July 1966
Zodiac Mk4 - Jan 1966 to July 1966
Valve spring set, 8 pieces. approx dimensions 48mm long, 32mm diameter, 4.1mm wire diameter,
Fits:-
Zephyr V4 Mk4- July 1966 onwards
Fits:-
Zephyr V4 Mk4- July 1966 onwards
Valve spring set, 12 pieces. approx dimensions 48mm long, 32mm diameter, 4.1mm wire diameter,
Fits:-
Zephyr V6 Mk4- July 1966 onwards
Zodiac Mk4 - July 1966 onwards
Fits:-
Zephyr V6 Mk4- July 1966 onwards
Zodiac Mk4 - July 1966 onwards
Model Series: E-Type Series I 3.8 1961-1964
Model Series: E-Type Series I 4.2 1965-1967.5
Model Series: E-Type Series I.5 4.2 1967.5-1968
Model Series: E-Type Series II 4.2 1969-1971
Model...
Model Series: E-Type Series I 4.2 1965-1967.5
Model Series: E-Type Series I.5 4.2 1967.5-1968
Model Series: E-Type Series II 4.2 1969-1971
Model...
Three part camshaft shell bearing set, 4 cylinder.
Three part camshaft shell bearing set, 4 cylinder.
Three part camshaft shell bearing set, 4 cylinder.
Standard inlet valve, dimensions 115mm long, 36.5mm diameter head with 7.8mm diameter stem.
Valve spring set, 8 pieces. approx dimensions 52mm long, 33.5mm diameter, 4mm wire diameter, Fits:- Consul Mk1 Consul Mk2
Valve spring set, 12 pieces. approx dimensions 52mm long, 33.5mm diameter, 4mm wire diameter,
Inlet and Exhaust valve stem oil seal, dimensions 22mm o/d x 18mm i/d x 12mm tall with a 6.85mm hole. Fits :- Consul Mk1 & 2. Zephyr Mk1, 2 & 3. Zodiac Mk1, 2 & 3. 1952-66
timing chain tensioner assy, cast aluminium body with spring loaded knurled snail cam. timing chain tensioner assy, cast aluminium body with spring loaded knurled snail cam.
Camshaft to camshaft sprocket dowel, dimensions 13.9mm long, 7.2mm diameter with a 8mm shoulder. Fits :- 8/10hp, 100E, Consul, Zephyr
New, re-manufactured timing chain crankshaft sprocket, 20 teeth with timing mark.
Consul Zephyr 4 Cyl Cam Shaft - fits Mk1 and 2 Consul and Zephyr 4 - 1951 to 1966
New, re-manufactured timing chain camshaft sprocket - for Consul, Zephyr Zodiac MKI, II and III. PLEASE NOTE - Four and six cylinder camshafts are now available for MKI, II and III Consul Zephyr...
Standard exhaust valve, dimensions 115mm long, 30mm diameter head wth a 7.8mm diameter stem.
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac...
Fits:-
Consul Mk1 (1951 to 1956)
Consul 375 Mk2 (1956 to 1962)
Zodiac Mk1 (1951 to 1956)
Zodiac...
Zephyr-Zodiac 6 Cyl Cam Shaft - fits Mk1, 2 and 3 Zephyr and Zodiac - 1951 to 1966
Four part camshaft shell bearing set, 6 cylinder.
Four part camshaft shell bearing set, 6 cylinder.
Four part camshaft shell bearing set, 6 cylinder.
Prices shown include VAT @ 20% where applicable
