AC Rebuild / Repair Kit for VACUUM SIDE of WE, WG and W type fuel pumps. Applications include Bedford TA series '53 to '56, Bedford S Type trucks '55 to '56 and Ford 10/12 and 15 cwt vans '58 to...
Parts
Fuel side diaphragm spring - usually purchased with fuel pump repair kit BD54 (Ford PN E195-Z-1) for WE, WG and W Vacuum pumps. 23.5mm OD, 51mm long, 1.5mm wire diameter. Spring Retainer is FPRRET3B.
Pressed metal spring retainer 27.5mm OD, 13.5mm ID, 4mm thick. Fuel side spring (part number FPRS10) retainer in WE pumps.
Aluminium inlet manifold with 1 1/2" ports for fitting triple HS2 1 1/4" bore carburettors (part number AP-9510-3SU) or HS4 1-1/2" SU carburettors (special order and limited availability). Weight...
Three piece aluminum 'heat sink' bracket set that bolts on to both the MkII and MkIII six cylinder Aquaplane inlet manifolds (part numbers AP-9425-6CYLMK2 and AP-9425-6CYLMK3). If purchased with a...
AC Fuel Pump rebuild repair kit for W, WE, WG and WH type pumps - FUEL SIDE. Kit contains diaphragm assembly, two valve assemblies, two bowl gaskets, engine pad gasket, valve plate and diaphragm...
Fuel pump to block paper gasket, overall dimensions 58mm tall x 70mm wide with 43mm hole centres. used on the 105E steel top fuelpump and the 109E glass bowl fuel pump.
fuel tank sender unit cork gasket, 69mm o/d x 50mm i/d with 6 holes.
With round type non return valves, body approx 60mm diameter. As BD 4 fuel pump repair kit.
Metal top fuel pump used 1959 - 1960 early models.
PLEASE NOTE – When breaking apart and re-assembling compression fittings on copper pipework that feature a brass olive, you need to fit a...
PLEASE NOTE – When breaking apart and re-assembling compression fittings on copper pipework that feature a brass olive, you need to fit a...
New manufactured unit. Applications include Ford 105E models 1961 onward, Classic 315, Classic Capri, Cortina Mk1, Corsair to 1965, Morgan 4/4 Series III/IV/V 1960 to 67.
PLEASE NOTE – When...
PLEASE NOTE – When...
for Solex carb only, not Formoco 997cc or 1198cc engine, shaft dimensions 7.91mm diameter x 12.03 overaul length, diaphragm measures 35mm x 35mm.
Aluminium inlet manifold with 1 1/2" ports for fitting triple HS2 1 1/4" bore carburettors (part number AP-9510-3SU) or triple HS4 1-1/2" SU carburettors. Weight approx 3.20kg. Supplied with 6 x...
Triple H2 1 1/4" bore carburettor assembly complete with linkages and banjo fuel unions, for fitting to our Aquaplane inlet manifolds AP-9425-6cylMK2 and MK3, for Zephyr and Zodiac*** The...
Air filter paper element -round - Ford alternative part reference 109E-9601-D. Also equivalent to other manufacturer part numbers: BMC Austin 1H11334 , 12H2088 Vauxhall Bedford 7955266 David Brown...
AC repair kit BD6, body approx 80mm diameter. suits larger export E93A pump and glass top 105E fuel pump.
Fuel pipe union nut, fits carburettor inlet, fuel pump and tank sender unit, 1/2" UNF thread accepts 1/4" o/d pipe.
Prices shown include VAT @ 20% where applicable
