Ford Zephyr 4 + 6 cylinder rear gearbox ext Seal Manual only (except automatic)
211E-7657-A
211E-7657-A
Parts
Ford Zephyr 4 + 6 cylinder Mk2 Mk3 Mk4 Manual Only (except Auto)
Brass synchro blocking ring (baulk ring)
Fits:-
Consul 315
Consul Capri
04/61 to 07/62
Fits:-
Consul 315
Consul Capri
04/61 to 07/62
Clutch friction centre plate - new remanufactured replacement item for 105E models. This is offered outright with no exchange required.
7-1/4" (183mm) diameter, 4 vibration damper springs with 20...
7-1/4" (183mm) diameter, 4 vibration damper springs with 20...
Re-conditioned clutch pressure plate to fit the Ford 105E, Exchange Item.
****We must receive your serviceable 105E old unit before we despatch a reconditioned unit****
****We must receive your serviceable 105E old unit before we despatch a reconditioned unit****
Clutch release bearing, ball bearing thrust race, sealed bearing packed with grease.
Fits Ford 105E 1959 onwards
Dimensions approx - 66mm o/d x 35.3mm i/d x 15.6mm thick.
Fits Ford 105E 1959 onwards
Dimensions approx - 66mm o/d x 35.3mm i/d x 15.6mm thick.
Rear gearbox seal (extension housing)
Fit in the end of the gearbox extension, preventing oil leakage.
Dimensions - 44mm o/d x 30.5mm i/d x 14.75mm deep
Fit in the end of the gearbox extension, preventing oil leakage.
Dimensions - 44mm o/d x 30.5mm i/d x 14.75mm deep
Rear gearbox mounting, overall dimensions approx 100mm long x 32mm wide x 47mm tall, two 5/16 studs 21mm long with 71mm centres with centre mounting hole at 12mm diameter.
Rear gearbox mounting, overall dimensions 120mm long x 68mm wide x 38mm tall, two bolt fixing to crossmember with 94mm centres, one centre bolt hole to gearbox.
New remanufactured first motion input shaft main drive gear, 17 teeth. fits:- Consul 315/Consul Capri, Cortina MK1 09/62 to 10/65,
New remanufactured gearbox main shaft,
fits:-
Consul 315/Consul Capri 7/62 onwards,
Corsair,
Cortina MK1
fits:-
Consul 315/Consul Capri 7/62 onwards,
Corsair,
Cortina MK1
Gearbox main shaft rear ball bearing race.
Fits:-
Consul 315, 07/62 onwards
Consul Capri, 07/62 onwards
Cortina Mk 1
Consul Corsair
Fits:-
Consul 315, 07/62 onwards
Consul Capri, 07/62 onwards
Cortina Mk 1
Consul Corsair
Brass synchro blocking ring (baulk ring)
Fits:-
Consul 315
Consul Capri
08/62 onwards
Fits:-
Consul 315
Consul Capri
08/62 onwards
New remanufactured lay gear assy. teeth 35-26-21-15-14,
Fits :-
Zephyr 4 Mk3.
Fits :-
Zephyr 4 Mk3.
Clutch Spigot sealed bearing, dimensions o/d 35mm, i/d 15mm, 11mm wide.
Fits:-
Zephyr V4
Zephyr V6
Zodiac V6
1966 onwards
Fits:-
Zephyr V4
Zephyr V6
Zodiac V6
1966 onwards
Front brake flexible hose for 105E & 307E models, 13" long (330mm) including threads.
Clutch or brake pipe - Front Brake Hose Mk1 Consul Zephyr Zodiac (also clutch hose) Hose is approx 367mm long (403mm including threads)
Gearbox first motion shaft ball bearing race.
Fits:-
Consul Mk1 & 2.
Zephyr Mk1 & 2.
Zodiac Mk1 & 2.
Fits:-
Consul Mk1 & 2.
Zephyr Mk1 & 2.
Zodiac Mk1 & 2.
Gearbox main shaft rear ball bearing race.
Fits:-
Consul Mk1 & 2.
Zephyr Mk1 & 2.
Zodiac Mk1 & 2.
Fits:-
Consul Mk1 & 2.
Zephyr Mk1 & 2.
Zodiac Mk1 & 2.
Gearbox overdrive main shaft front sealed bearing,
Fits :-
Consul Mk 2,
Zephyr Mk 2 & 3.
Zodiac Mk 2 & 3.
Fits :-
Consul Mk 2,
Zephyr Mk 2 & 3.
Zodiac Mk 2 & 3.
Brass synchroniser blocking ring, fitted between the gear cone and synchroniser hub.
Helps equalise gear speeds before engagement, reducing gear clash and wear.
Dimensions - 53mm o/d at teeth,...
Helps equalise gear speeds before engagement, reducing gear clash and wear.
Dimensions - 53mm o/d at teeth,...
New remanufactured lay gear assy. teeth 35-28-17-14, Fits :- Consul & Zephyr 6 between Nov 1952 to May 1953 (only used on Consul between engine numbers 67119 & 86495 and Zephyr 6 between...
Reverse idler gear, 15 teeth. Fits :- Consul, Zephyr & Zodiac Mk1 Consul, Zephyr & Zodiac Mk2
Gearbox overdrive main shaft rear ball bearing race,
Fits :-
Consul Mk 2,
Zephyr Mk 2 & 3.
Zodiac Mk 2 & 3.
Fits :-
Consul Mk 2,
Zephyr Mk 2 & 3.
Zodiac Mk 2 & 3.
Clutch slave cylinder seal kit, contains piston seal, dust cover and bleed nipple cap.
Piston seal 20.2mm o/d x 7mm i/d x 6.7mm thick, main body dust cover 30mm o/d x 24mm i/d x 16.25 tall.
Piston seal 20.2mm o/d x 7mm i/d x 6.7mm thick, main body dust cover 30mm o/d x 24mm i/d x 16.25 tall.
Clutch slave cylinder 107E model, supplied with rubber dust cover and bleed nipple.
Dimensions - Overall length 88mm, rear housing diameter 33.1mm with fixing hole bracket, front housing diameter...
Dimensions - Overall length 88mm, rear housing diameter 33.1mm with fixing hole bracket, front housing diameter...
New remanufactured gearbox main shaft with matched low and reverse sliding gear. non overdrive gearbox. Fits:- Consul Mk 2 375 Zephyr Mk 2 Zodiac Mk 2
Clutch release bearing, ball bearing thrust race, sealed bearing packed with grease.
Fits Ford 8/10hp 1932 to 1959 & 100E 1953 to 1962.
Dimensions approx - 72mm o/d x 38mm i/d x 17mm...
Fits Ford 8/10hp 1932 to 1959 & 100E 1953 to 1962.
Dimensions approx - 72mm o/d x 38mm i/d x 17mm...
New old stock synchronizer hub and cone assembly, fits standard gearbox only, NOT the overdrive gearbox.
Prices shown include VAT @ 20% where applicable
