Ford Zephyr 4 + 6 cylinder rear gearbox ext Seal Manual only (except automatic)
211E-7657-A
211E-7657-A
Parts
Ford Zephyr 4 + 6 cylinder Mk2 Mk3 Mk4 Manual Only (except Auto)
Brass synchro blocking ring (baulk ring)
Fits:-
Consul 315
Consul Capri
04/61 to 07/62
Fits:-
Consul 315
Consul Capri
04/61 to 07/62
New manufactured clutch centre plate, 7 1/4" diameter.
Ford 105E re-conditioned clutch pressure plate, exchange item.****We must receive your serviceable core item before we despatch a reconditioned unit****
Dimensions approx 66mm outside, 35.3mm inside x 15.6mm thick
Fit in the end of the gearbox extension, preventing oil leakage, 44mm o/d x 30.5mm i/d x 14.75mm deep
Rear gearbox mounting, overall dimensions approx 100mm long x 32mm wide x 47mm tall, two 5/16 studs 21mm long with 71mm centres with centre mounting hole at 12mm diameter.
Rear gearbox mounting, overall dimensions 120mm long x 68mm wide x 38mm tall, two bolt fixing to crossmember with 94mm centres, one centre bolt hole to gearbox.
New remanufactured first motion input shaft main drive gear, 17 teeth. fits:- Consul 315/Consul Capri, Cortina MK1 09/62 to 10/65,
New remanufactured gearbox main shaft,
fits:-
Consul 315/Consul Capri 7/62 onwards,
Corsair,
Cortina MK1
fits:-
Consul 315/Consul Capri 7/62 onwards,
Corsair,
Cortina MK1
Gearbox main shaft rear ball bearing race.
Fits:-
Consul 315, 07/62 onwards
Consul Capri, 07/62 onwards
Cortina Mk 1
Consul Corsair
Fits:-
Consul 315, 07/62 onwards
Consul Capri, 07/62 onwards
Cortina Mk 1
Consul Corsair
Brass synchro blocking ring (baulk ring)
Fits:-
Consul 315
Consul Capri
08/62 onwards
Fits:-
Consul 315
Consul Capri
08/62 onwards
New remanufactured lay gear assy. teeth 35-26-21-15-14,
Fits :-
Zephyr 4 Mk3.
Fits :-
Zephyr 4 Mk3.
Clutch Spigot sealed bearing, dimensions o/d 35mm, i/d 15mm, 11mm wide.
Fits:-
Zephyr V4
Zephyr V6
Zodiac V6
1966 onwards
Fits:-
Zephyr V4
Zephyr V6
Zodiac V6
1966 onwards
Front brake flexible hose for 105E & 307E models, 13" long (330mm) including threads.
Clutch or brake pipe - Front Brake Hose Mk1 Consul Zephyr Zodiac (also clutch hose) Hose is approx 367mm long (403mm including threads)
Gearbox first motion shaft ball bearing race.
Fits:-
Consul Mk1 & 2.
Zephyr Mk1 & 2.
Zodiac Mk1 & 2.
Fits:-
Consul Mk1 & 2.
Zephyr Mk1 & 2.
Zodiac Mk1 & 2.
Gearbox main shaft rear ball bearing race.
Fits:-
Consul Mk1 & 2.
Zephyr Mk1 & 2.
Zodiac Mk1 & 2.
Fits:-
Consul Mk1 & 2.
Zephyr Mk1 & 2.
Zodiac Mk1 & 2.
Gearbox overdrive main shaft front sealed bearing,
Fits :-
Consul Mk 2,
Zephyr Mk 2 & 3.
Zodiac Mk 2 & 3.
Fits :-
Consul Mk 2,
Zephyr Mk 2 & 3.
Zodiac Mk 2 & 3.
New remanufactured lay gear assy. teeth 35-28-17-14, Fits :- Consul & Zephyr 6 between Nov 1952 to May 1953 (only used on Consul between engine numbers 67119 & 86495 and Zephyr 6 between...
Reverse idler gear, 15 teeth. Fits :- Consul, Zephyr & Zodiac Mk1 Consul, Zephyr & Zodiac Mk2
Gearbox overdrive main shaft rear ball bearing race,
Fits :-
Consul Mk 2,
Zephyr Mk 2 & 3.
Zodiac Mk 2 & 3.
Fits :-
Consul Mk 2,
Zephyr Mk 2 & 3.
Zodiac Mk 2 & 3.
Clutch slave cylinder fitting the following classic Ford models; 1959 - '68 Anglia 105E, 123E, 307E, 309E van and estate. 1962- '66 Cortina MK1 1200, 1500 ( NOT Lotus models) 1963 - '65 Ford...
New remanufactured gearbox main shaft with matched low and reverse sliding gear. non overdrive gearbox. Fits:- Consul Mk 2 375 Zephyr Mk 2 Zodiac Mk 2
Dimensions approx 72mm outside, 38mm inside x 17mm thick.
New old stock synchronizer hub and cone assembly, fits standard gearbox only, NOT the overdrive gearbox.
Prices shown include VAT @ 20% where applicable
