Self-adhesive backed DUAL HARDNESS EPDM / sponge door seal. 15.5mm high, 11.5mm wide base. Used in many classic car door, window and general sealing applications
Parts
Self-adhesive backed DUAL HARDNESS EPDM/sponge door seal. 18mm high, 13.5mm wide base, 15.5mm diameter sponge bead section on rubber base. Used in many classic car door, window and general sealing...
Self adhesive backed expanded EPDM Sponge D Section. 8mm base with adhesive backing, 10mm high. Used in many classic car door, window and general sealing applications
Self adhesive backed expanded EPDM Sponge D Section. 12mm base with adhesive backing, 10mm high. Used in many classic car door, window and general sealing applications
Skinned, round expanded sponge cord, good for general sealing applications (including headlamp lens to rim applications in the smaller diameters).
Stock sizes:
4mm diameter
5mm diameter
6mm...
Stock sizes:
4mm diameter
5mm diameter
6mm...
Moulded rubber for rear windscreen / screen, standard type. 2.75mtr long we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking strip.
Moulded rubber for rear screen with black filler strip. deluxe type which uses the existing rigid chrome cover strips.
Grey rubber speedo cable grommet for where the speedo cable passes through the body, please note that this grommet needs to be split to get it over the cable, dimensions 30mm diameter x 11mm...
_03b811.jpg)
Moulded front windscreen rubber for the Ford Classic Capri,
_03b811.jpg)
Moulded rear windscreen rubber for the Ford Classic Capri
Moulded front windscreen rubber for the Ford Classic, Lotus Elan +2 S
Windscreen surround chrome effect locking insert trim. 14mm wide. Fits:- Cortina Mk1
Moulded part weather seal for front fixed quarter window on front door. Fits Cortina Mk1 2dr, supplied in pairs only.
Windscreen chrome surround joiner piece, overall dimensions 19mm long x 12.5mm wide x 5mm deep.
Fully skinned closed cell sponge rubber, shaped boot seal. glues onto the boot lid, 415cms long.
Rear windscreen moulded one piece rubber with shaped corners. Fits:- Corsair
Rubber and sponge push on boot seal, wire sprung carrier, rubber covered, round top sponge seal. overall height 30mm, sponge bead 16mm diameter with 2mm top lip. supplied in a 440cm length. Fits:-...
Moulded one piece front windscreen rubber for the Highline models, locking strip not included. Fits:- Consul Mk2 Highline Feb 56 to Feb 59 Zephyr Mk2 Highline Feb 56 to Feb 59 Zodiac Mk2 Highline...
Moulded front windscreen rubber for the Lowline models, Fits:- Consul Mk2 Lowline Feb 59 onwards Zephyr Mk2 Lowline Feb 59 onwards Zodiac Mk2 Lowline Feb 59 onwards
Moulded rear windscreen rubber for the Lowline models, Fits:- Consul Mk2 Lowline Feb 59 onwards Zephyr Mk2 Lowline Feb 59 onwards Zodiac Mk2 Lowline Feb 59 onwards
Rubber and sponge push on boot seal, wire sprung carrier, rubber covered, round top sponge seal. overall height 30mm, sponge bead 16mm diameter with 2mm top lip. supplied in a 440cm length with...
Moulded one piece rear windscreen rubber for the Highline models, locking strip not included. Fits:- Consul Mk2 Highline Feb 56 to Feb 59 Zephyr Mk2 Highline Feb 56 to Feb 59 Zodiac Mk2 Highline...
Front windscreen surround rubber, one piece moulded rubber with shaped corners. Fits Zephyr/Zodiac Mk3.
Rear windscreen surround rubber, one piece moulded rubber with shaped corners. Fits Zephyr Mk3.
Fully skinned closed cell sponge rubber, profiled boot seal. 375cms long.
Fits:-
Zephyr Mk3
Zodiac Mk3
Fits:-
Zephyr Mk3
Zodiac Mk3
Weatherstrip for exterior or interior use. Fitted between the door and the opening window glass. 17mm high, 5mm deep, with galvanised edge bead, one side plush fur pile finish.
Sold per 2m length...
Sold per 2m length...
19mm dia x 9mm high, 3mm fixing hole
25mm dia x 13mm high, 3mm fixing hole.
13mm dia x 5mm high buffer top, with cone back for fitting into a 5mm panel fixing hole
22mm dia x 5mm high buffer top with tab on base for securiung in a 12mm panel fixing hole.
19mm diameter x 15mm high buffer top, with tab insert on the base for fitting into 10mm panel fixing hole.
24mm diameter x 13mm high buffer top, with locating tab on base for fitting in to a 12mm panel fixing hole.
30mm diameter x 14mm high buffer top with fixing tab on base, for fitting into a 19mm panel fixing hole.
24mm diameter x 17mm high buffer top, with locating groove for fixing into a 19mm fixing panel hole.
17mm diameter x 14mm high buffer top with locating tab for securing in a 12mm fixing panel hole
17mm diameter x 24mm high buffer top with tab base for locating in a 12mm fixing panel hole
20mm diameter x 6mm high buffer top, with undercut coned spigot for securing in a 10mm fixing panel hole.
19mm diameter x 11mm high buffer top with tab on base for securing in an 11mm fixing panel hole.
Hollow moulded cap 20mm diameter x 11mm high with a 6mm stud hole entry into the hollow.
Rubber buffer stop with 31mm diameter x 18mm tall domed top section, with undercut coned tab for securing in a 16mm panel fixing hole.
Rubber buffer stop with 24mm diameter x 12mm high domed top, with 9mm diameter 11mm long plain fixing post for securing n a 9mm diameter panel fixing hole.
Universal flexible rubber channel, flock finish inside, will suit 4.5mm or 6mm glass. Can be made to fit variations of holder, to fit nominal width 17mm channel
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size - to suit panel hole of:
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size - to suit panel hole of:
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size - to suit panel hole of:
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size - to suit panel hole of:
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size - to suit panel hole of:
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size - to suit panel hole of:
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
Black rubber blanking grommets for approximately 1.5mm panel thickness. Packet size varies according to grommet size - to suit panel hole of:
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
12mm - pack of 50 pieces
16mm - pack of 50 pieces...
Mixed pack of plain blanking grommets (NO hole) - assortment of 90 pieces in a range of sizes for 6.5mm through to 25mm diameter panel holes. For metal panel thicknesses up to 1.6mm thick.
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Black rubber grommet, fits A post inner quarter panel (cowl) through 19mm panel hole.
Fully skinned closed cell sponge rubber, profiled door seal. fits Consul/Zephyr Mk1 front and rear doors, 410cms long. one doors worth.
Fully skinned closed cell sponge rubber, profiled boot seal. 320cms long.
Fits:-
Consul Mk1
Zephyr Mk1
Zodiac Mk1
Fits:-
Consul Mk1
Zephyr Mk1
Zodiac Mk1
Moulded front windscreen rubber with black filler locking strip. fits Consul/Zephyr Mk1 deluxe type which uses the existing rigid chrome cover strips.
Windscreen surround chrome effect locking insert trim. 14mm wide. Fits:- Consul Mk1 1951-56 Zephyr Mk1 1951-56 Zodiac Mk1 1951-56
Fully skinned closed cell sponge rubber, profiled door seal. fits Classic front and rear doors, 400cms long. one doors worth.
Fully skinned closed cell sponge rubber, profiled door seal. fits Zephyr/Zodiac Mk3 front and rear doors, 400cms long. one doors worth.
fully skinned closed cell sponge rubber, profiled door seal. fits Cortina Mk1 2dr, 410cms long. one doors worth.
fully skinned closed cell sponge rubber, profiled door seal. fits Cortina Mk1 4dr, 362cms long. one doors worth.
Fully skinned closed cell sponge rubber, profiled door seal. Glued to the door frame, supplied in a 380cm length (one doors worth)
Fits:-
Consul Mk2
Zephyr Mk2
Zodiac Mk2
Fits:-
Consul Mk2
Zephyr Mk2
Zodiac Mk2
Black moulded rubber for rear screen glass with plastic chrome filler strip. Consul, Zephyr and Zodiac Mk1.
Black expanded neoprene/sponge rubber half round section, skinned on all sides - 12.5mm base, 6.5mm maximum height.
Black, expanded neoprene/sponge rubber half round section, skinned on all sides - 16mm base, 8mm max. height.
Black expanded neoprene/sponge rubber half round section, skinned on all sides - 25mm base, 12.5mm max. height.
Section as per illustration. Base size approx 15mm x 15mm. Soft black sponge extrusion.
Section as per illustration, base 8.3mm, overall 15mm x 16mm. Black skinned sponge section
Section as per illustration, flat sides approx 13.5mm x 13.5mm. Black skinned hollow sponge section.
Sponge section as per illustration. Black fully skinned soft EPDM sponge rubber, off-set arrow head section. Approx dimensions - arrow head 20mm across (part that glues to door), centre section...
Section as per illustration, approx 16.5mm base x 15mm tall. Skinned sponge section
Section as per illustration, 9mm flat base x 8.5mm tall. Soft skinned black sponge section
Section as per illustration, 12.5mm x 12.5mm. Firmer skinned sponge section.
Section as per illustration, 17mm x 12mm. Grey only, black discontinued
Section as per illustration, base 8.5mm wide, overall 17mm x 17mm. Softer black skinned sponge section.
Section as per illustration, base 16mm wide, overall 20mm x 19mm. Firmer skinned black sponge flange section.
Section as per illustration, flat base approx 13mm wide, 15mm high. Soft skinned flanged sponge section.
Hollow sponge section as per illustration, 14mm base x 12mm tall, wall thickness 1.5mm, black.
Section as per illustration, 10mm wide x 12mm tall approx. Soft skinned black sponge section.
Section as per illustration, 11mm wide flat base x 12mm high. Soft black skinned sponge section.
Section as per illustration, small triangular sponge section, 12mm base x 6mm tall. Soft skinned black sponge.
Black sponge extrusion, as illustration, base 5.5mm, bead 6.5mm diameter, overall height 10mm.
Section as per illustration, 20mm base, 24mm tall flanged sponge section with hollow slot through base.
Skinned, round expanded sponge cord, good for general sealing applications (including headlamp lens to rim applications in the smaller diameters).
Stock sizes:
4mm diameter
5mm diameter
6mm...
Stock sizes:
4mm diameter
5mm diameter
6mm...
Skinned, round expanded sponge cord, good for general sealing applications (including headlamp lens to rim applications in the smaller diameters).
Stock sizes:
4mm diameter
5mm diameter
6mm...
Stock sizes:
4mm diameter
5mm diameter
6mm...
Skinned, round expanded sponge cord, good for general sealing applications (including headlamp lens to rim applications in the smaller diameters).
Stock sizes:
4mm diameter
5mm diameter
6mm...
Stock sizes:
4mm diameter
5mm diameter
6mm...
Skinned, round expanded sponge cord, good for general sealing applications (including headlamp lens to rim applications in the smaller diameters).
Stock sizes:
4mm diameter
5mm diameter
6mm...
Stock sizes:
4mm diameter
5mm diameter
6mm...
Skinned, round expanded sponge cord, good for general sealing applications (including headlamp lens to rim applications in the smaller diameters).
Stock sizes:
4mm diameter
5mm diameter
6mm...
Stock sizes:
4mm diameter
5mm diameter
6mm...
Skinned, round expanded sponge cord, good for general sealing applications (including headlamp lens to rim applications in the smaller diameters).
Stock sizes:
4mm diameter
5mm diameter
6mm...
Stock sizes:
4mm diameter
5mm diameter
6mm...
Extruded rectangular sponge section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
Extruded rectangular sponge section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
Extruded rectangular sponge section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
Extruded rectangular sponge section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
Extruded rectangular sponge section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
Extruded rectangular sponge section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
Extruded rectangular sponge section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
Extruded rectangular sponge section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
6mm x 19mm
10mm x 16mm
10mm x 19mm
13mm x 25mm
Prices shown include VAT @ 20% where applicable
